It is totally different to utilize a stand-up forklift as opposed to a sit-down unit. The way you transport and lift cargo in addition to your movements are totally different. If you do not have proper training for using a stand-up model, you can possibly cause harm co-workers or to yourself. When using a stand-up model, you need to follow the proper safety regulations. There are a few basic operating standards that must be met when operating a stand-up unit.
When starting, stand up on the forklift so as to get a feel for the controls and the steering knob. The steering is handled utilizing the knob steering plate as opposed to a steering wheel. Take note that this knob moves really fast, thus, you must be accustomed to moving it carefully in order to be certain not to over steer. The horn is situated on the control handle, as is the control for the movement of the forks and for backwards, forwards. The floor pedal allows the machinery to move.
When you are ready to begin, turn the key to start the equipment. Be sure that your forks are not extended. If you are moving around the floor, the forks must be pointed a little upwards. Never drive with the forks in their extended position. If you are moving forward, move the control handle forward and step on the pedal in order to make the lift move forward. If you are backing up, be sure to beep your horn in order to warn people around you. Look behind you prior to stepping on the pedal so as to make sure the path is clear and safe. After that, while stepping on the pedal, pull the control handle towards you. Always stay alert and focused and make sure that you are always operating in a safe way.
When it comes to turning corners, turn your steering knob in the direction you need to go while keeping your foot on the power pedal and your hand on the control handle. When turning right, the steering knob will move in a clockwise direction during forward travel. If you are turning left, your steering knob would go in a counter-clockwise direction.
The stand-up units take some getting used to, especially if you have only operated sit down units. With some training and taking some time to know the machine, you will be able to quickly and efficiently handle loads in little time.